Conical Drain Plugs – Kit
Original price was: $302.69.$285.60Current price is: $285.60.
The Conical Drain Plugs – Kit includes 2″, 3″ and 4″ plugs featuring a tapered design that securely seals standard drains. Flexible, non-absorbing polyurethane material resists oil, water, and most chemicals. Durable and easy cleaning for repeated use with removable eyebolts when covered by gratings.
Meets Cal OES MEL 9.3.33 requirements (see below)
Description
A straightforward and efficient solution for spills, the Ultra-Drain Plug effectively seals drains of nearly any size. Its flexible, pliable material quickly blocks drain holes, preventing fuel and chemical spills from entering drainage or stormwater systems.
Made from durable polyurethane, the Ultra-Drain Plug resists oil, water, and most harsh chemicals. Its tapered design allows for a secure fit into standard drains, stopping contaminants from passing through.
Key Features
- Safety orange color for high-visibility
- Eyebolts are removable, allowing installation of grating with Drain Plug in place
- Non-absorbing, easily cleaned for repeated use
- Cleans with soap and water
How To Use the Ultra-Drain Plugs
- Use the plug to prevent the liquid from entering a drain
Each plug contains a removable eye bolt. The eye bolt assist in placement and removal of plugs. - Insert the conical rubber plug into the drain to the point where snug fit is achieved.
Make sure the entire diameter of the drain is completely sealed. - Always wash the plug before reuse or storage
Wash the polyurethane plugs using warm water with a non-abrasive detergent or petroleum solvent cleaner. Dry the plug before storage. Store out of direct sunlight, and at room temperature
For situations where you need to quickly and effectively seal drain holes, we offer commercial drain plug to prevent contaminants and debris from entering.
These polyurethane drain plugs are capable of sealing the hole from water, oil and most chemicals. The material is also flexible enough to securely seal off standard drains and can be cleaned easily with soap and water.
Additional available in individual Ultra-Drain plug sizes
- 2 inch conical drain plug
- 3 inch conical drain plug
- 4 inch conical drain plug
- 6 inch conical drain plug
- 8 inch conical drain plug
- 10 inch conical drain plug
- 12 inch conical drain plug
Hazmat Resource can help you select products, creating quotes
and support - until equipment is in your hands & ready to use!
KAPPLER | DRÄGER | TELEDYNE FLIR | AVON | HAZCAT . . . just to name a few . . .
Cal OES MEL List – Firescope Hazardous Materials Minimum Equipment List (MEL)
This Polyurethane Conical Drain Plugs meets the requirements for the Firescope MEL List. To see all of the MEL products that HAZMAT Resource provides, visit our California MEL List page >>
For more information about the Conical Drain Plugs, contact us today +1 (805) 617-0987
Industrial Drain Plug
WARNING: All part numbers on this page can expose you to chemicals including nickel which is known to the state of California to cause cancer. For more information, please visit www.P65Warnings.ca.gov
The eyebolt helps in installing the Ultra-Drain Plug. It provides extra length and a holding/leverage point to make installation easier.
Yes, the eyebolt is removable and, depending on the application, should be removed to eliminate trip hazards.
Yes, the Ultra-Drain Plug is reusable provided that it has not been exposed to a chemical that has caused any degradation.
The Ultra-Drain Plug is made with urethane and will degrade/break down in extended UV exposure. It is recommended that drain plugs only be exposed for as long as required to contain and clean-up a spill. Long-term outdoor use is not recommended.
Typically, a standard soap and water mixture is all that is needed to clean the Ultra-Drain Plug. Once it has been cleaned it should be allowed to air dry and then returned to its original packaging.
The Ultra-Drain Plug should be stored in a cool, dry area in the box that it is shipped in.
‘NR’ stands for ‘Not Recommended’. HOWEVER, it is worth noting that most chemical compatibility guides (ours included) are based on a one-year immersion test. In other words, the material being tested is completely immersed in the chemical in question. After one year, the material is removed and checked for any degradation. Needless to say, a spill response product is not going to be exposed to a chemical for a year. So it’s possible that the Ultra-Drain Plug will be effective against a spill of a chemical that is listed as ‘NR’. The best way to know for sure is to test for yourself. Please contact our customer service team and they will be able to send you a no-charge sample.
Additional information
| Weight | 8 lbs |
|---|---|
| Dimensions | 5 × 12 × 12 in |
You may also like…
-
- 10 Decontamination
ENPAC Duck Ponds for HazMat
- $248.00 – $845.00
- Select options This product has multiple variants. The options may be chosen on the product page
Related products
-
- Sale!
- 9 Spill Kit and Leak Control
Chlorine Institute Emergency Kit B – Ton Containers US DOT 106A500X
- Original price was: $2,985.00.$2,740.00Current price is: $2,740.00.
- Add to cartAdd to quote
-
- 9 Spill Kit and Leak Control
Oil Absorbent Pillow
- $53.99 – $89.99
- Select options This product has multiple variants. The options may be chosen on the product page
-
- 9 Spill Kit and Leak Control
Edwards and Cromwell Kit C-3 Large Pipe Repair Clamp 5 in – 8 in
- $499.00 – $871.00
- Select options This product has multiple variants. The options may be chosen on the product page
