Non-Sparking Ball Peen Hammer

Description

The Non-Sparking Ball Peen Hammer protects against mechanical sparks such as friction and impact sparks caused by steel tools. Static sparks like mechanical sparks can ignite vapors, gases and dusts in flammable atmospheres. Keep non-sparking tools clean and free from impregnated particles and other contaminants.

Spark free ball peen hammers are designed for various tasks like striking chisels, punches, riveting, shaping, and straightening unhardened metal. When using them, make sure the hammer’s striking face is at least 3/8″ larger than the tool being struck to prevent chipping and injuries. Always strike squarely and avoid hitting with or against the hammer’s side to prevent accidents.

AMPCO Hammer, Ball Peen with Fiberglass Handle (H-112FG) is perfect as a hazmat hammer for use in potentially flammable situations.

 

Ball Peen Hammer Non-Sparking

 

• AMPCO Safety Tools 0.3 lb Non Sparking Ball Peen Hammer, 9 3/4″ length H-00FG
• AMPCO Safety Tools 1.1 lb Non Sparking Ball Peen Hammer, 11″ length H-112FG  (Meets MEL 13.2.4 & 13.3.4)
• AMPCO Safety Tools 1.2 lb Non Sparking Ball Peen Hammer, 14″ length H-1FG
• AMPCO Safety Tools 1.4 lb Non Sparking Ball Peen Hammer, 11″ length H-212FG
• AMPCO Safety Tools 1.5 lb Non Sparking Ball Peen Hammer, 14″ length H-2FG
• AMPCO Safety Tools 1.8 lb Non Sparking Ball Peen Hammer, 11″ length H-312FG
• AMPCO Safety Tools 1.9 lb Non Sparking Ball Peen Hammer, 14″ length H-3FG
• AMPCO Safety Tools 2.3 lb Non Sparking Ball Peen Hammer, 11″ length H-412FG
• AMPCO Safety Tools 2.4 lb Non Sparking Ball Peen Hammer, 14″ length H-4FG
• AMPCO Safety Tools 2.7 lb Non Sparking Ball Peen Hammer, 14″ length H-5FG
• AMPCO Safety Tools 3 lb Non Sparking Ball Peen Hammer, 14″ length H-6FG

Spark Free Ball Peen Hammer

 

NON-SPARKING • NON-MAGNETIC • CORROSION RESISTANT • HAND TOOLS

American Metal Products Company (AMPCO) Safety Tools for a Safe Workplace – Since 1922

Independent testing has revealed that this Non-Sparking Ball Pein Hammer is safe in MRI environments that use a static magnetic field of 3-Tesla and a maximum spatial gradient magnetic field of 720-Gauss/cm or less. Additionally, this product conforms to ASTM F2503 meets the requirements that ASTM A342 established.

See all of our AMPCO Safety Tools here >>

Need More Information?

For more information about the AMPCO Safety Ball Peen Hammer and other nonsparking hand tools, contact us today +1 (805) 617-0987

Cal OES MEL List – Firescope Hazardous Materials Minimum Equipment List (MEL)

The hammer non sparking meet the requirements for the Firescope MEL List. To see all of the MEL products that Hazmat Resource provides visit our California MEL List page >>

MEL 13.2.4 HAMMER, BALL PEEN: 8 to 16 oz.; Non-Sparking
acceptable.

Optional: one

MEL 13.3.4 NON-SPARKING, HAMMER, BALL PEEN: 8-16 oz.

Optional: One