Chem Tape
$34.53
Chem Tape is designed to provide strong chemical resistance and adhesion for taping the seams and openings of protective apparel and HazMat suits.
- Sold individually
- Rolls are 2” wide x 60 yards long
- Meets Cal OES MEL 10.2.18 requirements
Description
This Chem Tape offers a comprehensive solution for taping gloves, boots, respirators, and storm flaps, as well as for shelter-in-place applications. This chemical resistant tape provides an extra layer of confidence for your personal protective equipment (PPE) needs, delivering comparable durability to other cutting-edge protective suit materials.
If one Chemtape roll isn’t enough to meet your needs look here >>
Chemical Resistant Seam Sealing Tape
These tests were conducted under controlled laboratory conditions, not under real-world usage scenarios. It’s important to note that the tests were carried out on material samples, not on actual garments. Additionally, all chemicals were tested at a concentration of 95% and at a temperature of 75°F, except for Sodium Hydroxide, which was tested at 50%.
Please note: The tests mentioned were conducted in compliance with ASTM standards by independent laboratories. The data presented here is based solely on tests performed on material samples and does not pertain to finished garments.
CHEM TAPE CHEMICAL TEST DATA
Specific Chemicals Tested*
| CHEMICAL | MINUTES |
| Acetone 67-64-1 |
> 480 |
| Acetonitrile 75-05-8 |
> 480 |
| Carbon Disulfide 75-15-0 |
> 480 |
| Dichloromethane 75-09-2 |
> 480 |
| Diethylamine 109-89-7 |
160 |
| Dimethylformamide 68-12-2 |
> 480 |
| Ethyl Acetate 141-78-6 |
> 480 |
| Hexane 110-54-3 |
> 480 |
| Methyl Alcohol 67-56-1 |
> 480 |
| n-Hexane 110-54-3 |
> 480 |
| Nitrobenzene 98-95-3 |
> 480 |
| Phenol 99% @65 C 108-95-2 |
390 |
| Sodium Hydroxide, 50% 1310-73-2 |
> 480 |
| Sulfuric Acid, 98% 7664-93-9 |
> 480 |
| Tetrachloroethylene 127-18-4 |
> 480 |
| Tetrahydrofuran 109-99-9 |
> 480 |
| Toluene 108-88-3 |
> 480 |
* Industrial chemical testing was conducted in accordance with ASTM F 739 with normalized breakthrough times reported in minutes.
Chemical Protection Tape
For more information about the chemical resistant tape, contact us today +1 (805) 617-0987
Cal OES MEL List – Firescope Hazardous Materials Minimum Equipment List (MEL)
The Kappler chemical tape roll meets the requirements for the Firescope MEL List.To see all of the MEL products that HAZMAT Resource provides visit our California MEL List page >>
10.2.18 CHEMICAL RESISTANT-TAPE: Approximately 2” wide in rolls of 50’. Similar to Duct Tape but has chemical resistant outer layer.
Requirement: 2 rolls for each Type 1, Type 2, and Type 3 teams
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 6 × 6 × 4 in |
