Chem Tape (24 Rolls)

Description

Chem Tape (24 Rolls) offers a comprehensive solution for taping gloves, boots, respirators, and storm flaps, as well as for shelter-in-place applications. This chemical resistant tape provides an extra layer of confidence for your personal protective equipment (PPE) needs, delivering comparable durability to other cutting-edge protective suit materials.

Too many Chemtape rolls for your needs, get them by the roll HERE > >

Chemical Resistant Sealing Tape

These tests were conducted under controlled laboratory conditions, not under real-world usage scenarios. It’s important to note that the tests were carried out on material samples, not on actual garments. Additionally, all chemicals were tested at a concentration of 95% and at a temperature of 75°F, except for Sodium Hydroxide, which was tested at 50%.

Please note: The tests mentioned were conducted in compliance with ASTM standards by independent laboratories. The data presented here is based solely on tests performed on material samples and does not pertain to finished garments.

CHEM TAPE CHEMICAL TEST DATA

Specific Chemicals Tested*

* Industrial chemical testing was conducted in accordance with ASTM F 739 with normalized breakthrough times reported in minutes.

Kappler Chemtape Chemical Resistant Tape

For more information about the chemical barrier tape, contact us today +1 (805) 617-0987

Cal OES MEL List –  Firescope Hazardous Materials Minimum Equipment List (MEL)

The Kappler chemical tape roll meets the requirements for the Firescope MEL List.To see all of the MEL products that HAZMAT Resource provides visit our California MEL List page >>

10.2.18 CHEMICAL RESISTANT-TAPE: Approximately 2” wide in rolls of 50’. Similar to Duct Tape but has chemical resistant outer layer.

Requirement: 2 rolls for each Type 1, Type 2, and Type 3 teams